Pls help. Crown won't screw on

E
Posts
4
Likes
1
Hi Guys, I got my Grand Carrera RS36 (CAV5185.FC6237) I've been wanting for the longest time in the used market. I adjusted the time yesterday and the crown won't screw back on. I took it to a local watch repair and was advised that I needed to change the crown and tube but need to have TH work on it. Guy estimated about $1200 to have TH repair it! Watch and all functions work. Googling it proves the problem seems to be common. I expected more from a higher end model from TH. Any cost effective suggestions? Or just leave it the way it is? Thanks for the feedback.
 
Akineton
Posts
109
Likes
59
E ed c
Hi Guys, I got my Grand Carrera RS36 (CAV5185.FC6237) I've been wanting for the longest time in the used market. I adjusted the time yesterday and the crown won't screw back on. I took it to a local watch repair and was advised that I needed to change the crown and tube but need to have TH work on it. Guy estimated about $1200 to have TH repair it! Watch and all functions work. Googling it proves the problem seems to be common. I expected more from a higher end model from TH. Any cost effective suggestions? Or just leave it the way it is? Thanks for the feedback.

To have more exposure, this thread should probably be moved to the Tag Heuer Discussion. Here only the Tag Heuer Connected Discussion people (a much smaller crowd) will read it.
 
Jim Dollares
Posts
10,279
Likes
13,389
If you just bought it and this error was not in the description I would return it and save myself the cost and trouble of sending a watch I just got to TAG for a couple of months
 
Yago
Posts
4,257
Likes
7,184
Changing crown and tube for 1200? ridiculous.
Don't know what these crowns go for but the work is minimal. Any watchmaker charging more than 100 euro for that is ripping you off.
 
Albert-AMG
Posts
5,898
Likes
15,836
Akineton Akineton
To have more exposure, this thread should probably be moved to the Tag Heuer Discussion. Here only the Tag Heuer Connected Discussion people (a much smaller crowd) will read it.
Done 👍
 
Aquagraph
Posts
22,459
Likes
31,851
Yago Yago
Changing crown and tube for 1200? ridiculous.
Don't know what these crowns go for but the work is minimal. Any watchmaker charging more than 100 euro for that is ripping you off.

Yeah, that sounds absolutely ridiculous
 
E
Posts
4
Likes
1
Thanks for the replies. That's what I figured. For 1200, I can live without screwing the crown on. I never swim with any of my mechanical watches anyway. Anyone had any experience the same issue that can provide cost and process would be appreciated.
 
imagwai
Posts
6,076
Likes
7,334
If you sent it back to TAG, you'd probably get a full service including a new crown for $500ish. But if you don't want a full service, then just find any independent watch maker who can service TAGs and get them to fix the crown.
 
imagwai
Posts
6,076
Likes
7,334
Actually, you can send your watch in to TAG and you'll get an estimate of repair costs and what they want to do to it and you'll get the chance to either pay and get the work done, or you can ask them to send it back to you at no cost.
 
Aquagraph
Posts
22,459
Likes
31,851
I had my Pilot serviced for about 300 quid and that included replacing the crown and tube, at a local watch maker.
 
E
Posts
4
Likes
1
Appreciate all the feedbacks. Now I just have to find a watch repair that services Tags.
 
OttoWilliam
Posts
2,840
Likes
2,527
Anybody knows about how much it will take to repair vintage 844 screw down ?
 
Mspeedster
Posts
8,598
Likes
17,336
OttoWilliam OttoWilliam
Anybody knows about how much it will take to repair vintage 844 screw down ?
Depends on what needs to be repaired. I was quoted $30 by a specialist shop for the installation of a replacement crown tube on a vintage 1000. That didn't include the cost of the part, just the work.
Edited:
 
RockBurner
Posts
563
Likes
476
OttoWilliam OttoWilliam
Anybody knows about how much it will take to repair vintage 844 screw down ?

An 844?

Not sure on cost, but mine has a different sized crown tube to all the other 1000 models (3mm, not 2.5mm), so the difficulty has been sourcing one.

I think Tag1000diver.com can source the correct part.
 
SteveP
Posts
830
Likes
1,557
RockBurner RockBurner
An 844?

Not sure on cost, but mine has a different sized crown tube to all the other 1000 models (3mm, not 2.5mm), so the difficulty has been sourcing one.

I think Tag1000diver.com can source the correct part.
No doubt Justin at the above could supply new crown and tube. The crowns on the 844 are actually generic and can still be found easily and cheaply today.

I also wonder if Justin could do something with the OP's Carrera perhaps...Maybe worth contacting him Tag Heuer Watches - 1000 Parts, Service, & Restoration - Louisville KY (tag1000diver.com) @ed c
Steve
 
Mspeedster
Posts
8,598
Likes
17,336
SteveP SteveP
No doubt Justin at the above could supply new crown and tube. The crowns on the 844 are actually generic and can still be found easily and cheaply today.
Yup, replacements can be bought from his website.
https://www.tag1000diver.com/product-page/jumbo-crown-with-tube-844-980-006-980-007-980-032-980-005
https://www.tag1000diver.com/product-page/tag-heuer-844-5-844-custom-crown-with-special-tube

SteveP SteveP
I also wonder if Justin could do something with the OP's Carrera perhaps...Maybe worth contacting him Tag Heuer Watches - 1000 Parts, Service, & Restoration - Louisville KY (tag1000diver.com) @ed c
Steve
Pretty sure he could, and at a very fair price, if the OP doesn't mind shipping him his Carrera for repair.
 
E
Posts
4
Likes
1
Mspeedster Mspeedster
Yup, replacements can be bought from his website.
https://www.tag1000diver.com/product-page/jumbo-crown-with-tube-844-980-006-980-007-980-032-980-005
https://www.tag1000diver.com/product-page/tag-heuer-844-5-844-custom-crown-with-special-tube


Pretty sure he could, and at a very fair price, if the OP doesn't mind shipping him his Carrera for repair.

Dang you guys are awesome for the suggestions! I emailed Justin and waiting for reply. Hope he can help me source the part. I can only imagine how much tag would charge me if I go direct. Where is Justin located? Thanks again guys.
 
Mspeedster
Posts
8,598
Likes
17,336
E ed c
Dang you guys are awesome for the suggestions! I emailed Justin and waiting for reply. Hope he can help me source the part. I can only imagine how much tag would charge me if I go direct. Where is Justin located? Thanks again guys.
Fisherville, Kentucky USA
I've used him for both a vintage 1000 and a vintage Formula 1, but he also says he works on Carreras. He provides excellent service! 👍
 
Sign up or log in to reply...

Similar threads

RobH

Aquaracer crown won't screw down

RobH TAG Heuer Discussion
RobH
RobH
Posts
16
Views
1K