Forums Latest Members

Tag Heuer Carrera Calibre Heuer 02 Skeleton CBG2010.FT6143

  1. jamie1983

    jamie1983 Jun 1, 2021

    Posts
    18
    Likes
    2
    Just purchased and want to swap out to a red rubber band, will the tag connected bands fit or can someone point me in the right direction?

    Thank you
     
    ASW likes this.
  2. Albert-AMG

    Albert-AMG TAG Heuer Forums Moderator Staff Member Jun 1, 2021

    Posts
    5,398
    Likes
    13,813
    Congrats! :thumbsup:

    Your CBG2010 shares the strap design with the Connected Modular 45, but the straps are not compatible, precisely because of the Modular system, which has a specific link with the lugs

    B350F72B-3B61-4061-ADE4-A62754CADA0C.jpeg 7791BE7E-FF00-4984-AF76-1912DD7962C2.jpeg A787666F-B90C-4ADD-9B5B-B9A6FB13D6B7.jpeg
     
    jamie1983 and Jim Dollares like this.
  3. ASW

    ASW Jun 1, 2021

    Posts
    706
    Likes
    2,206
    But the current (2020 onwards) connected straps will fit any watch with the same width and a standard strap pin. I’m not sure on the watch you’ve bought but with a (very) tight fit they go on the 43mm version.
     
    jamie1983 and Jim Dollares like this.
  4. jamie1983

    jamie1983 Jun 2, 2021

    Posts
    18
    Likes
    2
    Mine is the 43mm, so maybe I'll be in luck.
     
  5. Albert-AMG

    Albert-AMG TAG Heuer Forums Moderator Staff Member Jun 4, 2021

    Posts
    5,398
    Likes
    13,813
    But the strap design of Gen3 Connected is not the same as Gen2 Connected Modular/Carrera Heuer 02, and probably it would not fill the gap between strap and lugs…

    Maybe this red strap (FT6156) of the Heuer 01 43mm Manchester United edition would fit your watch, @jamie1983
    1D1CBEE2-770F-4ABB-8B32-2C2353DB45C2.jpeg D135AED1-3823-48EC-81CF-C09DE3C203E9.jpeg
     
    Edited Jun 4, 2021
    jamie1983 likes this.
  6. Jim Dollares

    Jim Dollares Jun 4, 2021

    Posts
    9,209
    Likes
    11,568
    Be careful though, my guess is that the Manchester strap wont fit cause the springbar holes are drilled in different positions on different models. I asked TAG if that strap would fit my 43mm H01 and the answer was no.

    Good point Albert also about the gap, when I fit a normal strap on my H01 it looks awkward with the big gap between strap end and case.
     
    Albert-AMG likes this.