Help please if you can!

For about 10 years I have been looking on and off for a replacement bracelet for this watch.

I am completely uncertain where to look from here. I do occasionally see links that might fit it in some of the usual spots.

The bracelet mounts without end caps at 24mm but seems to taper down to 17mm. I believe the links are 17mm similar to the 2000's bracelet but really don't want to buy a bunch of stuff to "try" to find out.

Any expert help would be appreciated. Even finding a few links would make this wearable.

This post has some of the best photos to see the bracelet. (Thanks to original poster btw.)
http://forums.watchuseek.com/f29/fs-tag-heuer-specialist-pilot-chronograph-1335122.html

Cheers,
smacjet

 

Exactly, as the 230.006 has no endlinks, but is attached with the middle of the bracelet straight to the case by a pin, so I wonder what those endlinks are for in the pictures. The reference number on the clasp of my 230.006 TAG Heuer Pilot is by the way: 348/31.

 

Thanks for the help so far!!! All leads are good on projects like these.

Not too sure if the bracelet is the correct one. Sure looks close though.

I have not seen a TAG Pilot in quite a while, but I'm thinking that the series 2 mentioned in the add is dependent on the endlinks matching up to a 20mm mount. The 230.006 starts at 23/24mm and tapers all the way to 17mm.

The next question is maybe tracking down a link or two for the bracelet I have. I'm wondering if the half-moon links would work that were found on other Heuer bracelets (ie 2000) would fit from around the same time period? I do occasionally see links that look right that are at 17mm where the clasp is 3xx/31. Seems the /31 is pretty constant.